Site Overlay

Considerations Before Buying an Air Compressor

Before purchasing an air compressor, there are several factors to consider.

When it comes to the garage and workshop, an air compressor may be quite useful. Whenever an electrical or building project is being undertaken, they will be brought into the picture and taken into consideration. As a result, selecting the most appropriate one is critical in order to be more productive at work. When choosing on the best one, one should take into consideration a number of criteria, the most important of which are as follows:

a source of electrical power

The fact that they are electric makes them more portable, however locating a plug point can be difficult. When an activity is taking place indoors, one has no choice but to use an electric device to facilitate the action. This is due to the fact that a gas one will produce fumes. Nonetheless, the gas-powered generator outperforms the electric-powered generator. The voltage required is determined by the amount of electricity that will be required by the compressor. A 2HP engine will require a power outlet with a voltage of 220-240V, but a standard domestic compressor will just require 110-120V of electricity.

 

Piston or portable: which is better?

Piston ones are equipped with a functional motor that is responsible for increasing air pressure throughout the depletion process. The increase in air pressure, as a result, corresponds to the increase in air consumption. Air compression in a piston engine necessitates significant amounts of maintenance. It is more suitable for commercial and industrial applications than than menial tasks….

 

Portable ones perform the same functions as piston ones, but do not need the use of a tank. Portable compressors maintain consistent air pressure levels for an extended length of time, making them appropriate for use in a variety of domestic applications, such as pipes, pumps, and other electrical equipment.

 

A piston one is more expensive than a portable one, largely due to the fact that the piston one has both a tank and a portable handheld.

 

Pistons with a single or two stages of compression

Pumps for air compressors are available in two configurations: single-stage pumps and two-stage pumps. Using the action of a single-stage piston, single-stage air compressors sucking and compressing air to the required pressure are achieved. The highest pressure that a single-stage piston can generate is 150 pounds per square inch (PSI). Piston air compressors with a single stage require a higher CFM rating than air compressors with two stages.

 

A two-stage air compressor is equipped with two pistons that perform the same functions as a single piston in a single-stage air compressor. The operation of the two-stage system, on the other hand, is a little different since the process does not stop with compression. As opposed to this, the pistons compress the air, allow it to cool, and then compress it again. Two-stage compressors are more efficient since the air is cooled down while being compressed, increasing the density of the compressed air. Two-stage ones make advantage of their air pressure and do not let it go at any point. These are capable of producing a maximum pressure of 200 PSI.

 

Noise

If noise is a problem, opting for an oil-lubricated model rather than an oil-free one is a wise decision. These machines do not require a level surface for the oil to lubricate the machine, as do oil-filled ones. Air compressors with an oil lubricant are more efficient than air compressors without an oil lubrication.

 

Protection from the sun’s rays

Thermal protection is provided in air compressors in the form of a switch that shuts off the motor if it becomes too hot. Customers must pick a product that has a heat protection switch because of the investment they have made.

 

 

Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © Z00V. All Rights Reserved. | by Selvagio.com